EN ISO 3262-17-2000 涂料用填充剂.规范和试验方法.第17部分:沉淀硅酸钙

作者:标准资料网时间:2024-05-11 21:39:44 浏览:9441 来源:标准资料网

【英文标准名称】:Extendersforpaints-Specificationsandmethodsoftest-Part17:Precipitatedcalciumsilicate(ISO3262-17:2000);GermanversionENISO3262-17:2000
【原文标准名称】:涂料用填充剂.规范和试验方法.第17部分:沉淀硅酸钙
【标准号】:ENISO3262-17-2000
【标准状态】:现行
【国别】:
【发布日期】:2000-10
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:涂料;定义;油值;硅酸钙;规范;规范(验收);材料规范;组分;材料试验;覆层材料;表面;染料;pH值;颜料;特性;试验;填充剂;退火损失;额定值;筛余物;沉淀
【英文主题词】:Annealinglosses;Calciumsilicate;Coatingmaterials;Composition;Definition;Definitions;Dyes;Extenders;Materialsspecification;Materialstesting;Oilvalue;Paints;pH;Pigments;Precipitation;Properties;Ratings;Sieveresidues;Specification(approval);Specifications;Surfaces;Testing
【摘要】:
【中国标准分类号】:G51
【国际标准分类号】:87_060_10
【页数】:15P.;A4
【正文语种】:英语

下载地址: 点击此处下载

返回跳至顶部

上一篇: EN ISO 3262-21-2000 涂料用填充剂.规范和试验方法.第21部分:石英砂(地下天然石英)
下一篇: EN ISO 3262-20-2000 涂料用填充剂.规范和试验方法.第20部分:烟化石英

Product Code:SAE ARP9013/1
Title:Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods
Issuing Committee:G-14 Americas Aerospace Quality Standards Committee (Aaqsc)
Scope:The purpose of this SAE Aerospace Recommended Practice (ARP) is to ensure conformance for each product characteristic being verified in a lot, without maintaining information from previous lots. ARP9013/1 specifies a product acceptance system for isolated lots. For example, isolated lot sampling avoids keeping track of the normal, tightened, and reduced levels of sampling formerly used in MIL-STD-105 and currently used in ANSI/ASQC Z1.4. Because those switching rules provided significant long-term protection for product quality, these isolated lot tables replace that protection in other ways.【英文标准名称】:Hexagonheadscrewswithmetricfinepitchthread.ProductgradesAandB
【原文标准名称】:公制细牙螺纹六角头螺钉.产品等级A和B级
【标准号】:BSENISO8676-2011
【标准状态】:现行
【国别】:英国
【发布日期】:2011-04-30
【实施或试行日期】:2011-04-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:紧配合螺纹;名称与符号;尺寸规格;紧固件;头;六角头螺钉;ISO微型螺纹;机械连接;米制螺纹;产品等级;性能;螺钉(螺栓);规格;螺纹
【英文主题词】:Close-fitthreads;Designations;Dimensions;Fasteners;Head(anatomy);Hexagonheadscrews;ISOminiaturescrewthreads;Mechanicallinkages;Metricscrewthreads;Productgrades;Properties;Screws(bolts);Specifications;Threads
【摘要】:ThisInternationalStandardspecifiesthecharacteristicsofhexagonheadscrewswithmetricfinepitchthreadwithnominalthreaddiameters,d,from8mmto64mm,ofproductgradeAfornominalthreaddiameters,d,from8mmto24mmandnominallengths,l,uptoandincluding10dor150mm,whicheveristheshorter,andofproductgradeBfornominalthreaddiameters,d,over24mmornominallengths,l,over10dor150mm,whicheveristheshorter.If,inspecialcases,specificationsotherthanthoselistedinthisInternationalStandardarerequired,theycanbeselectedfromexistingInternationalStandards,forexampleISO724,ISO888,ISO898-1,ISO965-1,ISO3506-1,ISO4753andISO4759-1.ItisintendedthatcoarsethreadscrewsaccordingtoISO4017bethefirstchoice.
【中国标准分类号】:J13
【国际标准分类号】:21_060_10
【页数】:20P.;A4
【正文语种】:英语